Table of Contents
Advertisement
Sending using the ADF
1. If the machine is already in Fax mode, skip to step 3. If the machine is
in Copy mode, press COPY/FAX to change to Fax mode.
2. Adjust the document guides — by sliding either of them to the left or
right — to fit the page(s) you'll be faxing. Your fax machine's
automatic document feeder (ADF) will hold up to 50 pages of letter-
sized paper, 25 pages of legal-sized paper or 15 pages of ledger-sized
paper.
Note: If your fax machine's scanning width (see page 78) is set to
"A4" and you insert a letter-sized document, your machine
scans the center 8.2" and sends it unreduced (see pages 82-84
for more on reduction). This means that each side of the page
will have a 0.16" margin that your fax machine will not scan.
3. If you're sending a multi-page
document, "fan" the pages
slightly. The bottom sheet should
extend just slightly from the
others.
4. Insert the document face up.
When you insert documents
correctly, you will hear a short
beep.
The display will now show the
current scanning width setting
and the amount of memory
available.
Document Ready
A4
Mem: 100%
5. Slide the document guides to fit the width of the document.
53
Advertisement
Table of Contents
