Table of Contents
Advertisement
5. Use the numeric keypad to enter the number exactly as your machine
should dial it, including whatever codes your phone system may
require. The number can be up to 40 characters in length:
76: Fax Number
9-5550629_
Your display can show only 20 characters at a time. To view
characters beyond those 20 (such as with an international long-
distance number), press
Important: Do not press ENTER.
Note:
If you make a mistake or want to erase characters
entered in a previous setting, press CANCEL to erase
leftward. Or, if you want to change just one character in
the number, press
to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the number is
just as you want it.
6. Now, while you still can see the fax number on the display, press
COMMUNICATION OPTIONS three times and then press ENTER.
The display shows:
Polling
File No.
If you're performing regular (not database) polling, press ENTER and
skip to step 8.
7. Use the numeric keypad to enter the one- or two-digit identifier for
each database file you want to poll. You can specify up to 10 files;
between the entry of each new file, press COMMUNICATION
OPTIONS to insert a comma but do not insert a comma after the
last file number.
For example, here, we've entered 2, 6, COMMUNICATION
OPTIONS, 2, 7, COMMUNICATION OPTIONS, 2, 8,
COMMUNICATION OPTIONS (the letter in preparation for
another file number):
Polling
File No.
Note:
The display shows only four characters of the group
number.
Important: Again, do not insert a comma after the last group
number.
When the entry is complete, press ENTER.
to scroll leftward or
to move the cursor leftward, or
_
6, 27, 28_
214
to scroll rightward.
Advertisement
Table of Contents
