Turn Off The Transport Mode - Pitney Bowes 4100 Operator's Manual

Turn off the transport mode

Important: Be sure you do not turn the power on until after the
transport screws have been removed. (See "Removing the
transport screws," page 27.)
To turn off the transport mode:
1. Power up the machine.
If the machine is already in Fax mode, skip to step 3.
If the machine is in Copy mode, proceed to step 2.
2. Press COPY/FAX to switch the machine to Fax mode.
3. Press PROGRAM, *, E.
Mirror Locked
4. Select Off by pressing PROGRAM. Then press ENTER to turn off
the transport mode. The mirror carriage will move to the home
position.
Mirror Locked
Important: If you must reship the machine to any other location, turn
on this mode to move the mirror carriage to the transport
position (in step 4, above, press PROGRAM to set the
transport mode to On), then power off and mount the mirror
carriage using the four transport screws.
:On
Program/Enter
:Off
Program/Enter
40