Pitney Bowes 4100 Operator's Manual page 184

Plain-paper fax machine
Hide thumbs Also See for 4100:
Table of Contents

Advertisement

11. Use the numeric keypad to enter exactly the sub-address to identify
this F-Code box.
Note: The sub-address must be unique to this F-Code box; i.e., no other
F-Code box in this fax machine can have the same sub-address.
The sub-address can be up to 20 numbers in length. In this example,
we've entered 654321.
03: Sub-Address No.
654321_
Note: To erase previously entered characters, press CANCEL to
erase leftward. Or to change just one character in the number,
press
to move the cursor leftward, or
rightward to that character and press CANCEL to erase it.
Then re-enter until the number is just as you want it.
12. When the number is as you want it, press ENTER to store it.
Note: If you entered a sub-address number already being used by
another F-Code box, the machine will beep and briefly display
the following:
03: Enter Sub-Address
Sub-Address In Use
The machine now returns you to step 11. Please enter a different
number for your F-Code box's sub-address.
13. Next, the machine asks for your F-Code box's password. This is the
password for ITU-T compatible F-Code fax transactions. (It is not a
passcode your machine uses to control who can make settings for the
box.) If you set the password, a caller must know and use it in order
to send a fax to you via F-Code communication. You don't have to
have a password to use the F-Code box. However, using a password
will make your F-Code communications much more secure.
Important: Again, this is the password for ITU-T compatible F-
Code fax transactions. It is not the passcode the
machine can use to control user access to the F-Code
box for, as an example, making settings. You'll make
that setting a few steps down the line.
Depending on whether you already have a password entered for your
F-Code box, the display will show either:
03: Password
_
If you do wish to enter or change this box's password, proceed to step 14.
If you do not wish to enter or change this box's password, skip to step 15.
to move it
03: Password
or
123456789*#_
183

Advertisement

Table of Contents
loading

Table of Contents