Activating Security Reception - Pitney Bowes 4100 Operator's Manual

Activating security reception

1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, O (the letter O, not a zero), 1, ENTER. The
display shows:
Set Security Rx
Enter Passcode : ****
3. Use the numeric keypad to enter the passcode. Here, we've entered
6296:
Set Security Rx
Enter Passcode : 6296
4. Press ENTER. The display shows:
Security Rx:
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
5. To change the setting, press PROGRAM once or twice until your
desired setting appears. In this example, we've chosen On.
Security Rx:
6. Press ENTER. The display shows the machine's current clock setting:
Set Security Rx
Enter Time:
If you want security reception to begin now (and at this same time
every day), skip to step 8. Otherwise, proceed to step 7.
7. Use the numeric keypad to enter the time (24-hour format) when
security reception should begin every day. "Type over" the numerals
displayed. Here we've entered 17:35 (5:35 p.m.):
Set Security Rx
Enter Time:
To change a digit, press
to that digit. Then, enter the correct digit.
8. Press ENTER to save the setting.
Off
Program/Enter
On
Program/Enter
15:42
17:35
to move leftward, or
153
to move rightward,