Table of Contents
Advertisement
4. Place the document face down on the FBS and align it with the
document scale on the right, then gently close the book cover. Make
sure the document is set beyond the right front corner.
CAUTION
:
!
5. Press BOOK DOC SIZE to select the document size, letter (displayed
as Ltr), legal (Legl), half-letter (HLtr) or B4. (Half-letter is 8.5" wide x
5.5" tall; B4, widely used internationally, is 10.1" x 17.0".)
6. Adjust resolution and contrast if necessary.
If these are OK, skip to step 7. Otherwise, as desired:
Press RESOLUTION to change the resolution.
Press CONTRAST, the press
7. Now, enter the fax number.
(In fax terms, you're calling the remote fax, on its remote fax number.)
Use the numeric keypad to enter the number.
Press Start
919725552009_
As you can see, you also enter any access codes (such as a 9 for
"dialing out" from an office telephone system, or 1 for long-distance)
along with the number, just as you would for a regular phone call.
... or ...
Press a one-touch key to dial the number. (See page 92)
... or ...
Press SPEED DIAL/TEL INDEX once, followed by a three-digit
speed dial number, to dial the number. (See page 99)
... or ...
Press SPEED DIAL/TEL INDEX twice and search for the name to
dial the number. (See page 109)
Gently close the book cover so that you don't catch
your hands, possibly injuring them.
When a thick document, such as a book, is on the
FBS, do not press strongly from the top of the
book cover. This may break the contact glass and
cause an injury.
or
to change the contrast.
56
Advertisement
Table of Contents
