Table of Contents
Advertisement
5. To change the setting, press PROGRAM repeatedly until your chosen
mode appears. In this example, we've chosen light contrast.
Contrast:
6. Press ENTER to save the setting. The display asks which scanning
width you wish to select:
Scan Width:
For most uses, "A4" is the proper setting; it scans the central 8.2" of
each page. However, for documents of unusual width, you may wish to
use the "B4" and "A3" settings, which scan the central 9.9" and 11.6",
respectively, of each page. (See "A4, B4, A3" in the Glossary beginning
on page 259.)
If the setting you see is acceptable, skip to step 8.
Otherwise, proceed to step 7.
7. To change the setting, press PROGRAM repeatedly until your chosen
setting appears. In this example, we've chosen "B4."
Scan Width:
8. Press ENTER to saved the setting.
Of course, you always can change the resolution and contrast before
sending (you can change the scanning width only through the previously
described procedure):
• Press RESOLUTION to change the resolution.
• Press CONTRAST, then press
Light
Program/Enter
A3
Program/Enter
B4
Program/Enter
or
to change the contrast.
79
Advertisement
Table of Contents
