Table of Contents
Advertisement
Note: For F-Code communication to occur, three things must be true:
• The remote fax machine must support ITU-T sub-addressing
(and password) capabilities.
• A mailbox with an ITU-T sub-address must exist on the remote
fax. (It doesn't have to have a password. If the other machine
hasn't at least one box with a sub-address, F-Code
communication will be impossible.)
• You must know the ITU-T sub-address and (if applicable)
password information for the mailbox on the remote machine.
F-Code transmission
1. Press COPY/FAX to change to Fax mode, if necessary.
2. Insert the document.
3. Adjust resolution and contrast if necessary.
4. If you wish to toggle between transmission from the feeder and
transmission from memory, press MEMORY TRANSMIT.
Note: This toggle affects only a transmission from the ADF.
Transmission from the FBS is always memory transmission.
5. Press COMMUNICATION OPTIONS seven times and then press
ENTER.
7. F-Code TX
Comm. Option/Enter
6. Press ENTER.
Enter Sub-Address
_
7. Use the numeric keypad to enter the appropriate sub-address
number. In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press CANCEL to back up, then enter
the correct one-digit number.
198
Advertisement
Table of Contents
