Dialing From The Numeric Keypad While Using The Pin Mask - Pitney Bowes 4100 Operator's Manual

If you've specified "Mode2" — as you autodial, load the code
In this mode, you don't have to add the PIN to the autodialer setting itself.
Instead, you enter the PIN manually each time you autodial:
1. Perform the usual autodialing procedure for the number itself. Here,
we've entered speed-dial number 001:
Press Start
S001_
2. Press START. The machine now asks for the PIN:
Enter PIN Number
_
3. Use the numeric keypad to enter the PIN.
Enter PIN Number
1057_
4. Press START. Your machine will dial the number.
Note: If you select either Mode 1 or Mode 2 and will be using batch
transmission (see pages 123-130), you must store the PIN access
code for the remote unit within the appropriate batch box.

Dialing from the numeric keypad while using the PIN mask

Note: If the PIN mask feature is off, you dial normally.
If you've specified "Mode1" — use "star" power
1. Enter the phone number, then press the * ("star") key and enter the PIN.
The PIN always goes last. For example, to dial 19725550911 with a PIN
of "123456," enter 19725550911*123456:
Press Start
19725550911*123456
2. Press START. The PIN disappears from the display, and your machine
dials the desired phone number.
165