Table of Contents
Advertisement
To use DRD on your fax machine:
1. Contact your phone company and confirm that the phone company
has set up DRD service for you. If possible, also find out which
distinctive ring pattern the phone company has assigned you.
2. If the machine is in Fax mode, proceed to step 3.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
3. Press PROGRAM, J, 1, 9, ENTER. The display will show:
DRD:
If you see the setting you wish, skip to step 5.
Otherwise, proceed to step 4.
4. To change the setting, press PROGRAM once or twice until your
desired choice appears. Here, we've chosen On.
DRD:
5. Press ENTER.
Ring Pattern:
If "A" is the pattern you want, skip to step 7.
If not, proceed to step 6.
6. Press PROGRAM repeatedly until your desired pattern appears (in
our example here, "C"):
Ring Pattern:
7. Press ENTER to set your machine to the displayed ring pattern.
Important:
If your telephone company gives you only very general
ring pattern specifications, or if you otherwise encounter a
problem while trying to use your machine's DRD feature,
please try ALL of the listed ring patterns. (If you still
have a problem after trying all of the patterns, please call
the Pitney Bowes Customer Support Center.)
Important:
With your machine set for using DRD, it won't respond to
any ring pattern other than the one you've selected, above.
To reset the fax so it will respond once again to normal
rings, repeat steps 2-5 above — except, in step 4, toggle it
to "Off." Your fax now will respond normally.
Off
Program/Enter
On
Program/Enter
A
Program/Enter
C
Program/Enter
146
Advertisement
Table of Contents
