Table of Contents
Advertisement
13. The display now shows:
005:Group No.
_
You may now designate up to 32 call groups to which this number will
belong. (If necessary, review "Considering call groups," page 92.)
If you do not wish to change this number's call group status, skip to
step 15.
If you do wish to change this number's call group status, proceed to
step 14.
14. Use the numeric keypad to enter the call groups to which this number
will belong. There are 32 possible call groups, numbered 1-32. (If
you're changing a previous call group entry, see the note at the end of
this step.)
This shows the entry of 6 to assign this speed-dial number to Call
Group 6:
005:Group No.
6_
Note: You do not have to insert a leading zero for the call group.
Note: To assign this number to all 32 call groups, enter 0 (zero).
If you want to assign the number to more than one call group, insert a
comma after each number (except the last one, of course) by pressing
GROUP DIAL. This shows the entry of 6, GROUP DIAL, 7,
GROUP DIAL, 1, 0 to assign this speed-dial number to Call Group 6,
7 and 10:
005:Group No.
6, 7, 10_
Note: If you make a mistake or want to erase characters entered in
a previous setting, press CANCEL to erase leftward. Or, to
change just one character in the setting, press
cursor leftward, or
and press CANCEL to erase it. Then re-enter the setting.
005:Group No.
or
1, 4, 12_
to move it rightward, to that character
103
to move the
Advertisement
Table of Contents
