Table of Contents
Advertisement
5. Use the numeric keypad to enter the "hub" machine's number exactly
as your machine should dial it, including whatever codes your phone
system may require. The number can be up to 40 characters in length:
77: Fax Number
9-5550629
Your display can show only 20 characters at a time. To view
characters beyond those 20 (such as with an international long-
distance number), press
Important: Do not press ENTER.
Note:
If you make a mistake or want to erase characters
entered in a previous setting, press CANCEL to erase
leftward. Or, if you want to change just one character in
the number, press
to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the number is
just as you want it.
6. Now, while you still can see the fax number on the display, press
COMMUNICATION OPTIONS three times and then press ENTER.
The display shows:
Relay Tx
Group No.
7. Use the numeric keypad to enter the two-digit identifier (01-32) for
the first call group. You can specify up to 10 separate groups for each
relay broadcast initiation; between the entry of each new group, press
GROUP DIAL to insert a comma but do not insert a comma after
the last group number. For example, here, we've entered 0, 4, GROUP
DIAL, 1, 1, GROUP DIAL, 2, 4:
Relay Tx
Group No.
Note:
The display shows only four characters of the group
number.
Important: Again, do not insert a comma after the last group
number.
When the entry is complete, press ENTER.
to scroll leftward or
to move the cursor leftward, or
_
1, 24_
211
to scroll rightward.
Advertisement
Table of Contents
