Table of Contents
Advertisement
When using the FBS
1. If necessary, press COPY/FAX to change to Copy mode.
Otherwise, proceed to step 2.
2. Open the book cover, place your document face down
on the FBS and align it with the scale on the right.
Note: Be sure that you place the original document on the FBS in
the same orientation as the paper in the paper source (which
you'll select in step 4, below).
3. Gently close the book cover.
4. Press PAPER SIZE ? to select recording paper (see page 68).
5. Adjust resolution and
contrast if necessary. Press
RESOLUTION to change
the resolution. Press
CONTRAST, then press
or
to change the
contrast.
Note: For copying, your
only resolution
choices are either
superfine or
halftone mode.
6. Set the reduction or enlargement rate, if you want. (See "Setting of
enlargement or reduction for copying," page 74.)
7. If you want to make only one copy of each page of the document, skip
to step 10. Otherwise, proceed to step 8.
8. Use the numeric keypad to enter the desired number of copies for
each page in the document. You may choose 1 to 99 copies. Here, we've
entered "03" to choose a setting of three copies.
Copy Ready
| | |
Num:
3
H
C1:Ltr
100%
71
Number of copies
Advertisement
Table of Contents
