Adjust The Monitor Speaker's Volume - Pitney Bowes 4100 Operator's Manual

Adjust the monitor speaker's volume

You can set the volume of the monitor speaker, assuring that on-hook
dialing will be as loud (or as soft) as you require.
1. Press MONITOR/CALL on the control panel. You now should hear a
dial tone, and the display will show:
Important: If you don't hear a dial tone, make sure your fax
machine is plugged into a working phone line.
2. If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3. Adjust the volume as you wish:
To turn the volume up, press
To turn the volume down, press
The LCD indicates the volume. Here are the possible settings:
Volume:
Volume:
Volume:
Volume:
4. Press MONITOR/CALL again to hang up.
** Tel Mode **
.
.
** Tel Mode **
** Tel Mode **
** Tel Mode **
** Tel Mode **
41
= Volume off.
= Low setting.
= Medium setting.
= Loudest setting.