Paper Source And Paper Size; Sort Copy - Pitney Bowes 4100 Operator's Manual

Paper source and paper size

If you wish to select the paper supply source manually, press PAPER
SIZE ? repeatedly until your desired paper source appears:
Copy Ready Num:
| | |
H C1:Ltr
Copy Ready Num:
| | |
H C2:Legl
Copy Ready Num:
| | |
H C3:Ltr
Copy Ready
Tray → Enter
You may also choose from either the standard paper cassette (C! or the
Multipurpose tray (T). If your machine also has either or both of the two
optional cassettes, you may also choose (C2) or (C3). To use the
Multipurpose tray, press ENTER while the display shows:
Then, press PAPER SIZE ? to set paper size. This is the size of the paper
in either the paper cassette (or cassettes, if you have one or both of the
optional cassettes) or Multipurpose tray. You can set letter- or legal-sized
paper in the paper cassette(s), and letter-, legal- or half-letter-sized paper
in the Multipurpose tray. When you set the transparency film on the
Multipurpose tray, please select "OHP" mode.
Copy Ready Num:
| | |
H T:Ltr
Copy Ready Num:
| | |
H T:Legl
Copy Ready Num:
| | |
H T:HLtr
Copy Ready
| | |
H T:OHP
Contrast level
See "Contrast" (pages 47-49) for more information.

Sort copy

Press SORT COPY to toggle (switch on or off) sorting copy if necessary.
The initial setting is Off.
1
100%
1
100% Appears only when the indicated
1
optional paper cassette is attached.
100%
Num: 1
1
100%
1
100%
1
100%
Num: 1
100%
68