Table of Contents
Advertisement
5. Use the numeric keypad to enter the number exactly as your machine
should dial it, including whatever codes your phone system may
require. The number can be up to 40 characters in length:
74: Fax Number
9-5550629
Your display can show only 20 characters at a time. To view
characters beyond those 20 (such as with an international long-
distance number), press
Important: Do not press ENTER.
Note:
If you make a mistake or want to erase characters
entered in a previous setting, press CANCEL to erase
leftward. Or, if you want to change just one character in
the number, press
to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the number is
just as you want it.
6. Now, while you still can see the fax number on the display, press
COMMUNICATION OPTIONS seven times. The following display
appears:
7. F-Code Tx
Comm. Option/Enter
7. Press ENTER. The display will show:
Enter Sub-Address
_
8. Use the numeric keypad to enter the ITU-T sub-address for the box to
which you want to send the document. Here, we've entered 123456:
Enter Sub-Address
123456_
9. Press ENTER. The display will show:
Enter Password
_
Note: If you know that this sub-address does not have a password,
skip to step 11.
to scroll leftward or
to move the cursor leftward, or
219
to scroll rightward.
Advertisement
Table of Contents
