Table of Contents
Advertisement
4. Do not enter any characters here (if you do, you can't program a
batch transmission into this key). Instead, only press ENTER and
then proceed to step 5.
75: Fax Number
_
Note: Again, do not enter any characters here. If you have already
accidentally entered any characters here, press CANCEL as
many times as needed to erase all of them before proceeding
to step 5.
Note: If this key already holds a batch transmission, skip to step 6.
5. Press COMMUNICATION OPTIONS five times and then press
ENTER. The display shows:
Batch Tx
Enter Box No.
6. Use the numeric keypad to enter the one-digit number for the batch
box you wish to assign to this key. Here, we've entered 5:
Batch Tx
Enter Box No.
Note: To change an identifier already entered, press CANCEL to
erase it. Then re-enter until the number is just as you want it.
7. Press ENTER.
8. The display now shows the next programmable one-touch key.
If you do not wish to change any other key's programming, press
STOP to return your machine to its usual standby mode.
If you do wish enter or change this key's programming, go back to
step 3.
If you wish to enter or change another key's programming, go back to
step 2.
_
5_
217
Advertisement
Table of Contents
