Attaching The Handset - Pitney Bowes 4100 Operator's Manual

Attaching the handset

Here is how to attach the handset.
Important: Do not connect the handset directly to a telephone wall
jack. Instead, connect it only to your fax, as these
instructions describe.
1. Remove the two screw caps and screws.
2. Using a Phillips-head
screwdriver, attach the
handset cradle to the
rear side of your
machine, using the
screws included with
the cradle.
3. Plug one end of the
handset cord (it's curled)
into the PHONE1 jack on
the left of your machine.
4. Plug the other end of the
handset cord into the jack
on the handset. If
connected to a phone line,
your fax machine is now
"off-hook."
Note: The handset
has a small
"flash" button
which you can press while holding the handset, putting
the fax machine back "on-hook" until you can hang up the
handset properly in step 5.
5. Place the telephone handset onto the handset cradle. The cradle will
press the handset's "flash" button, hanging up the handset.
32