Erasing A Speed-Dial Number - Pitney Bowes 4100 Operator's Manual

2. Press SPEED DIAL/TEL INDEX. The display will show:
S_
3. Use the numeric keypad to enter the three-digit identifier (such as
018, in this example) for the speed-dial number you want to dial. The
display will show:
Press Start
9-555-5783_
Note: Remember that your fax machine's monitor speaker is not a
speakerphone; so, if you dialed by using the monitor speaker,
be sure to pick up the handset and speak to the other person
when he/she answers.
Note: You also can use this method to dial a fax call when, for some
reason, you want to hear the remote unit's fax tones. (Make
sure there's a document in the feeder.) When you do hear
those tones over either your handset or the monitor speaker,
press START to send the document in the feeder; if you're
using your handset, hang it up at this point.

Erasing a speed-dial number

1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, B, 2, ENTER. The display shows:
Enter Speed-Dial No.
001:No Number Stored
If 001 is the speed-dial number you want to erase, skip to step 5.
3. Use the numeric keypad to enter the three-digit identifier for the
speed-dial number you want to erase. Here, we've selected 005:
Enter Speed-Dial No.
005:9-1-555-987-6543
4. If you change your mind and wish to erase a different speed-dial number,
just go back to step 3 and perform it before going on to step 5.
** Tel Mode **
Enter Speed-Dial No.
or
001:9-555-584-6950_
106