Setting Of Enlargement Or Reduction For Copying - Pitney Bowes 4100 Operator's Manual

Setting of enlargement or reduction for copying

Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is
available only for copying, not for faxing.
Important: Copy enlargement is available only for copying using the
FBS; it is not available for copying using the ADF.
To change the reduction or enlargement rate for copying, either select a
preset rate or directly enter a rate.
Selecting a preset rate
Either...
• Press ENLARGE to select one of the following fixed enlargement rates.
100% → 129% → 200%
129%: Half-letter → Letter
... or ...
• Press REDUCE to select one of the following fixed reduction rates.
100% → 78% → 64% → 50%
78%: Legal → Letter
64%: Ledger (11" x 17") → Letter
Directly entering a rate
Using the numeric keypad, directly enter the reduction or enlargement
rate by doing one of the following:
Either...
1. Press #.
2. Enter your desired rate using the numeric keypad. You can set any
rate from 50% reduction through 200% enlargement.
3. Press # again.
... or ...
Press or to adjust the rate, at 1% intervals, from/including 50%
reduction through 200% enlargement.
74