Performing Batch Transmission While Using The Pin Mask - Pitney Bowes 4100 Operator's Manual

If you've specified "Mode2" — the machine guides you
1. Enter the phone number as usual.
Press Start
19725550911_
2. Press START. The display now shows:
Enter PIN Number
_
3. Use the numeric keypad to enter the PIN.
Enter PIN Number
123456_
4. Press START. Your machine will dial the number.

Performing batch transmission while using the PIN mask

Note: The following instructions presume you are familiar with how
to set and use both your machine's autodialer and its batch
transmission feature. If you need to review, see pages 90-122
for more on the autodialer and/or pages 123-130 for more on
batch transmission.
Note: If the PIN mask feature is off, you dial normally.
If you've specified "Mode1" or "Mode2"
Important: Any autodialer number you use with batch transmission must
include the PIN. (To review how to include this information in
an autodialer number, review the Mode 1 instructions under
"Autodialing while using the PIN mask," page 163.)
Before sending a batch transmission to a desired number the first time, you
must store the PIN within its batch box. Here's how:
1. Perform the batch box setting until you've entered the batch box number.
The display now asks for the fax number (here, we're working with batch
box 1):
1:Fax Number
_
166