Table of Contents
Advertisement
Setting for legal-size paper
Your fax comes set for letter-sized paper. To set it to use legal-sized paper:
1. Unlock the pin from the upper set
of holes by reaching inside of the
paper cassette and pressing the
nib, as shown.
2. Remove the pin.
3. Insert the pin into the
middle set of holes. You
will hear a click when it
is locked into place.
4. Install the paper guide
into the holes
corresponding to the
paper size you are
installing.
Important:
Remember, you've now told your fax that the paper
cassette holds legal-sized paper. If you now try to use
letter-sized paper without returning the pin to the upper
holes (the setting for letter-sized), your fax will sound an
alarm tone and display the following message when you
try to print:
Check Rx Paper Size
Open&Close Top Cover
5. Be sure to attach the LGL sticker to the outside of the cassette to
remind you which paper size it contains.
35
Advertisement
Table of Contents
