Table of Contents
Advertisement
10. Use the numeric keypad to enter the appropriate ITU-T password for
the box (if there is one; if there's not, you may skip to step 11, as
explained in the second Note below). In this example, we've entered
654321.
Enter Password
654321_
Note: If you make a mistake, press CANCEL to back up, then enter
the correct number.
When the entry is complete, press ENTER.
11. If you want the transmission to begin immediately every time you
press the key, press ENTER again and skip to step 14.
If you want to delay the transmission (perhaps to take advantage of
lower phone rates), press COMMUNICATION OPTIONS, ENTER.
12. There's a choice to make. Instruct your fax to carry out this delayed
command in one of the following ways:
Option 1: Perform the command once at a certain time on a certain
day of the month (For example, "Do this at 5:05 p.m. on
the 30th.") To select this option, use the numeric keypad
to enter the date and time when the fax should perform
the command:
Delayed
Enter Time:
Option 2: Perform the command at a certain time each day you
press the key. (For example, "Do this at 5:05 p.m. today.")
To select this option, use the numeric keypad to enter 0, 0
(i.e., 00), and then the time when the fax should perform
the command:
Delayed
Enter Time:
13. Press ENTER, ENTER.
14. The display now shows the next programmable one-touch key.
If you do not wish to change any other key's programming, press
STOP to return your machine to its usual standby mode.
If you do wish enter or change this key's programming, go back to
step 3.
If you wish to enter or change another key's programming, go back to
step 2.
30/17:05
00/17:05
220
Advertisement
Table of Contents
