Table of Contents
Advertisement
Printouts have irregularities
• The paper you're using may have absorbed
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
Printouts have white and/or black lines
• The toner cartridge or drum unit may be
ABCDE
ABCDE
ABCDE
• The charger may be dirty.
ABCDE
ABCDE
Printouts have toner smudges
• The toner may be unevenly distributed inside the
ABCDE
ABCDE
ABCDE
• The toner cartridge or drum unit may be
ABCDE
ABCDE
• If you find smudges on the back of the printouts,
moisture, perhaps due either to high humidity or
water having been spilled on the paper supply at
some point. Toner will not adhere well to paper at
the location where the paper has been wet.
Replace the paper with dry paper and try printing
again.
defective.
Remove and check the cartridge for damage. If the
problem persists, replace either or both of the
cartridges as indicated.
Your machine normally cleans the charger
automatically. If other solutions fail, please contact
your local Pitney Bowes office or call the Pitney
Bowes Diagnostic Center.
toner cartridge.
Remove the cartridge and shake it a few times to
redistribute the toner inside. If the problem
persists, replace the cartridge.
defective.
Remove and check the cartridges for damages. If
the problem persists, replace either or both of the
cartridges as indicated.
the transport roller may be dirty.
Your machine normally cleans the transport roller
automatically. If the other procedures suggested
above do not solve the problem, please contact your
local Pitney Bowes office or contact the Pitney
Bowes Diagnostic Center.
236
Advertisement
Table of Contents
