Dialing Manually From 9930 Telephone Handset; Voice Request Dialing - Pitney Bowes 9930 Operator's Manual

4.4.7 Dialing Manually from the Model 9930 Handset (off-hook dialing)
You can use the Model 9930 Telephone Handset to dial manually according to the
following instructions:
Do This
1. Insert the document face down in the Automatic
Document Feeder.
2. Lift the Telephone Handset.
3. Enter the phone number by pressing the Numeric
Keypad Keys. Example: Enter 5553495
NOTE: If your phone system requires an access number
to reach an outside line, enter it first, followed by a pause
(press the Pause Key — represented by a "-" in the phone
number). Example: 9-5553495.
4. When you hear the answer tone, press SEND/RECEIVE
and then hang up the Telephone Handset.
NOTE: If the line is busy, hang up the Telephone Handset.
Try again several minutes later by pressing the REDIAL
Key.

4.4.8 Voice Request Dialing

Although these optional dialing methods can be used for facsimile transmission,
they are typically used for placing Voice calls.
This Happens
MODE/NORMAL
ORIGINAL/NORMAL
(DATE/TIME)
PHONE OFF HOOK
The numbers appear in the
display. The 9930 will auto-
matically dial the destination.
5553495
The document is sent to the
destination shown in the
display.
37