Table of Contents
Advertisement
If you do decide to go ahead with activating Block Junk Fax, here's how:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, J, 1, 1, ENTER. The display shows your fax's
current setting:
Block Junk Fax: Off
If the setting you see is acceptable, skip to step 4.
Otherwise, proceed to step 3.
3. To change the setting, press PROGRAM repeatedly until your chosen
setting appears. In this example, we've chosen Mode2.
Block Junk Fax: Mode2
4. Press ENTER to save the setting.
What you do next depends upon what you selected in step 2 or 3.
• If you selected either Off or Mode 1, the machine will return to its
normal standby mode. Ignore steps 5-10 in this procedure.
• If you selected either Mode 2 or Mode 3, the display will show:
Set BlockJunk Dial
Press ENTER and proceed to step 5 to enter or modify a junk dial
number. Otherwise, press PROGRAM and skip to step 10.
5. Depending on whether you already have a number entered into the
blocked numbers list, the display shows one of the following:
Enter Fax Number
01:_
If you have not entered a fax number into this slot in the list, skip to
step 7. Otherwise, proceed to step 6.
Program/Enter
Program/Enter
Program/Enter
Select BlockJunk No.
or
01:555-2208
171
Advertisement
Table of Contents
