Table of Contents
Advertisement
Activating the PIN mask
Important:
For this feature to work, you must have preset the passcode
to something besides 0000. If necessary, review "The key to it
all: the passcode," page 150.
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, J, 1, 6, ENTER. The display shows:
Set PIN Mode
Enter Passcode : ****
3. Use the numeric keypad to enter the four-digit passcode. In our sample
here, we've entered 2099.
Set PIN Mode
Enter Passcode :2099
Note: If you enter an invalid passcode, the machine's security feature
will reject the attempt and abort the operation.
4. Press ENTER.
PIN Mode:
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
5. To change the setting, press PROGRAM repeatedly until your desired
setting appears. In this example, we've chosen Mode 1.
PIN Mode:
6. Press ENTER.
Autodialing while using the PIN mask
Note: The following instructions presume you are familiar with how to set
and use your machine's autodialer. If you need to review, see pages
90-122.
Note: If the PIN mask feature is off, you use the autodialer normally.
Off
Program/Enter
Model
Program/Enter
163
Advertisement
Table of Contents
