Table of Contents
Advertisement
9. Press SORT COPY once or twice to "toggle" (switch on or off) the
sorting of copies, as desired.
10. Press START to begin the copying process.
Note: To stop the copying before it is through, press STOP.
Note: Thanks to your machine's TriAccess feature (see page 149 for
more), copying doesn't keep you incommunicado while in
progress: you can start a fax or voice call and even receive a
voice call during copying.
When using the Multipurpose tray
When you need to use a size of paper not currently loaded in your
machine's paper cassette(s), or when you want to use a special type of
paper (such as transparency film), use the Multipurpose tray.
1. Either insert the document in the ADF or place it on the FBS.
2. Place a sheet of printout
paper on the Multipurpose
tray. Then align the paper
guides to the sheet's edge
and insert the sheet until
it comes to a stop.
Note: Place the original
document in the
same orientation
as the paper in the
paper source
(which you'll select
in step 5, next
page).
• If you are going to make more than one copy, you should insert the
printout paper only one page at a time.
• You may use letter-, legal- or half-letter-sized paper. (Half-letter is
8.5" wide x 5.5" tall.)
3. Press PAPER SIZE ? repeatedly until the following display appears:
Copy Ready
4. Press ENTER.
Num:
1
Tray → Enter
72
Advertisement
Table of Contents
