Table of Contents
Advertisement
5. If you change your mind and wish to select a different F-Code box,
just use the numeric keypad to enter the two-digit number for the
desired box before going on to step 6.
6. Press ENTER.
If you are creating this F-Code box for the first time, skip to step 8. If
you selected a previously created F-Code box which has a previously
set passcode, the display will show:
03: Set F-Code Box
F-Code Passcode: ****
7. To modify this previously created F-Code box, enter the proper
passcode (not the ITU-T sub-address and not the ITU-T password)
using the numeric keypad, then press ENTER.
Note: If you enter an invalid passcode, the fax machine will reject
the attempt and abort this operation.
8. The machine now is prompting you for a name for this F-Code box.
Depending on whether you already have a name entered for this F-
Code box, the display now shows either:
03: Box Name: Upper
_
To enter or change this F-Code box's name, proceed to step 9.
If you do not wish to enter or change this F-Code box's name, skip to
step 10.
03: Box Name: Upper
or
03: Pitney Bowes America
181
Advertisement
Table of Contents
