Table of Contents
Advertisement
Printing from (and turning off) security reception
When security reception is active, an incoming fax goes directly into your
fax machine's memory (but is not printed) and lights the MEMORY
RECEIVE light.
To retrieve the faxes received during this security reception (and to
return your machine to normal reception until the next time):
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, O (the letter O, not a zero), 2, ENTER. The
display shows:
Print Mem Rx Doc.
Enter Passcode : ****
3. Use the numeric keypad to enter the passcode. Here, we've entered
6296:
Print Mem Rx Doc.
Enter Passcode : 6296
4. Press ENTER.
• If you've entered the correct passcode, your fax machine will print
all documents in — and then erase them from — its memory; and
it will turn security reception back off until reaching the
appropriate time again.
• If you've entered an incorrect code, your fax machine will refuse to
print and security reception remains active.
• If the machine has not received any document, the "No Document
Stored" message will show on the display and security reception
remains active.
154
Advertisement
Table of Contents
