Table of Contents
Advertisement
If you specified memory transmission (ADF or FBS):
• Your fax scans your document into memory first, then dials the other
fax.
• The display shows the Location ID and the document's width and
resolution settings:
Shipping & Receiving
LTLG
Note: If the speed-dial number doesn't have a Location ID, the
number appears.
• When the other machine answers, your fax will transmit the document
directly from memory. (To review memory transmission, see page 50.)
If you specified non-memory transmission (ADF only):
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document
through its scanner, transmitting as it goes.
• The display shows the Location ID and the document's width and the
resolution settings:
Shipping & Receiving
LTLG
Note: If the speed-dial number doesn't have a Location ID, the
number appears.
Phoning via speed-dial
To dial a phone call using a speed-dial number.
Here's how to make the call:
1. Obtain a dial tone by doing one of the following:
• Lifting the handset.
• Press MONITOR/CALL to use the monitor speaker.
Normal
Normal
105
Advertisement
Table of Contents
