Table of Contents
Advertisement
5. Original document exit — Where the original document comes out.
6. Side cover — Open to fix printout jams.
7. Multipurpose tray — One of two locations where you put the
recording paper (the paper cassette is the other). Holds only one
sheet, either letter, legal or half-letter size paper.
8. Top cover release — Pull up on this to open the top cover.
9. Top cover — Opens to provide access for changing the toner and
drum unit (or, occasionally, fixing printout jams).
10. Book cover — Opens to scan an original document using the flatbed
scanner (FBS).
11. Document tray — Supports the original document for straighter
feeding into the automatic document feeder (ADF).
12. Document guides — You can adjust these for the width of the
original document so it will feed properly into the ADF.
13. Automatic document feeder (ADF) — The slot into which you
place your original document for faxing or copying. It holds up to 50
sheets of letter-sized paper, 25 pages of legal-sized paper or 15 pages
of 11" x 17" (ledger or tabloid)-sized paper.
14. Scanner cover — Opens to provide access, during occasional jams, to
an original document you have put into the ADF.
15. Scanner cover release — Pull up on this to open the scanner cover.
16. Flatbed scanner (FBS) — Makes it possible for you to fax or copy
objects and even irregularly shaped sheets, just as on a conventional
copier.
17
Advertisement
Table of Contents
