Setting Silent Mode - Pitney Bowes 4100 Operator's Manual

Note: Not all fax machines have ECM. If you've activated ECM and
then transmit to a fax machine not currently using ECM, there is
no change in the fax transmission from a usual, non-ECM
transmission.
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, J, 0, 7, ENTER. The display shows the current
ECM setting:
ECM Mode:
If the setting you see is acceptable, skip to step 4.
Otherwise, proceed to step 3.
3. To change the setting, press PROGRAM once or twice until your
chosen setting appears. In this example, we've chosen Off.
ECM Mode:
4. Press ENTER to save the setting.

Setting silent mode

If you and your fax share a quiet place, you'll really appreciate being able
to put the machine into silent mode. This mutes both the ringer and the
"I'm done!" beep your machine makes after sending or receiving a fax or
making a copy.
Note: Let's say it again — silent mode mutes both the ringer and the
beep. So, if you're using your fax machine as both a fax and phone
(with the optional handset), you may not wish to use this feature.
Note: Of course, turning on the silent mode on your fax machine won't
turn off ringers on other telephones in your house or office.
Similarly, other phones won't distinguish between fax and voice
calls.
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
On
Program/Enter
Off
Program/Enter
86