Table of Contents
Advertisement
F-Code database polling
1. Press COPY/FAX to change to Fax mode, if necessary.
2. Press COMMUNICATION OPTIONS eight times.
8. F-Code Polling
Comm. Options/Enter
3. Press ENTER.
Enter Sub-Address
_
4. Use the numeric keypad to enter the appropriate sub-address
number. In this example, we've entered 123456.
Enter Sub-Address
123456_
5. Press ENTER. The display will show:
Enter Password
_
6. Use the numeric keypad to enter the appropriate password number.
In this example, we've entered 654321.
Enter Password
654321_
Note: If you know that this sub-address does not have a password,
skip to step 8.
7. Press ENTER. The display will show:
Enter Fax Number
_
8. Enter the fax number either by pressing a one-touch key, entering a
speed-dial number or dialing from the numeric keypad. Do not press
START.
9. What you do now depends upon when you wish the transmission to
begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
200
Advertisement
Table of Contents
