Table of Contents
Advertisement
6. When the date and time entry is as you wish, press ENTER to save
the delayed transmission. The display shows:
Enter Fax Number
_
7. Enter the fax number to which the delayed transmission should go.
You may either press a one-touch key, enter a speed-dial number or
just use the numeric keypad normally.
Note: If you make a mistake or want to erase characters entered in
a previous setting, press CANCEL to erase leftward. Or, if
you want to change just one character in the number, press
to move the cursor leftward or
character and press CANCEL to erase it. Then re-enter until
the number is just as you want it.
8. Press START. Your machine will return to its normal standby mode,
while showing this on the display:
Sep 6 1998
This means your fax machine is "reserved" for the delayed
transmission command you just programmed.
If you had set the machine for transmission from memory, it will scan
the document into memory, after which you can use the machine
normally.
If you had set the machine for transmission from the ADF, the
machine can receive faxes but can't transmit.
** Reserved **
17:17
118
to move it rightward, to that
Advertisement
Table of Contents
