Table of Contents
Advertisement
To change only one digit, press
move it rightward, to that digit. Then, enter the correct digit.
4. Press ENTER to save the clock setting and continue EasyStart.
5. The display now asks whether you want to set the calendar/clock for
automatic recognition of daylight saving time (DST).
Daylight Saving: Off
When the setting is On, your machine automatically will set itself to
DST or to standard time, depending upon the calendar setting, at
2 a.m. on the appropriate "switchover" Sundays each year.
When the setting is Off, no such automatic change will occur.
(We have provided this choice because some areas do not observe
DST.)
If the setting is you see is acceptable, skip to step 8.
6. To change the setting, press PROGRAM once or twice until your
choice appears (here we've changed the setting to On):
Daylight Saving: On
7. Press ENTER to save the setting and continue.
8. The LCD now asks you to enter your fax number as you want it to
appear on other fax machine's displays or printouts. The fax industry
term for this number is Subscriber ID.
Your Fax Number
_
9. Use the numeric keypad to enter the desired number. To put in a dash
for easier reading, as shown here, press DIALING OPTIONS once.
The number may contain up to 20 characters (numbers and dashes).
Your Fax Number
972-555-5525
Note: If you make a mistake or want to erase characters entered in
a previous setting, press CANCEL to erase, leftward. Or, if
you want to change just one character in the number, press
to move the cursor leftward, or
character and press CANCEL to erase it. Then re-enter until
the number is just as you want it.
to move the cursor leftward, or
Program/Enter
Program/Enter
44
to move it rightward, to that
to
Advertisement
Table of Contents
