CDM-570/570L Satellite Modem with Optional IP Module
Appendix C
C.2.4
Enter FAST Access Code
Enter the FAST Access Code as follows:
a) Press CLEAR to return to the UTIL: FAST submenu.
b) From the UTIL: FAST submenu, use the ◄ ► arrow keys to select Cnfg, and then press
ENTER.
c) From the FAST Configuration screen, use the ◄ ► arrow keys to select to select Edit
Code, and then press ENTER.
d) Carefully enter the 20-digit Fast Access Code. On the bottom line, use the
keys to select a digit to edit, and then use the ▲▼ arrow keys to edit the value of that
digit. Confirm that the FAST Access Code string has been accurately composed, and then
press ENTER.
The modem responds with "Configured Successfully" if the new FAST Access
Code is accepted:
On the other hand, the modem responds with "FAST Code Rejected!" if the new
FAST Access Code is invalid:
Press ENTER or CLEAR to return to the EDIT CODE screen, and then re-enter the
FAST Access Code as needed. Should the error persist after repeating the code entry
procedure, contact Comtech EF Data Customer Support for further assistance.
FAST:Cnfg View (H/W 0.03)
MainBoard S/N: 123456789
FAST Configuration:
Edit Code
Demo Mode
Edit 20 digit FAST Code:
00000000000000000000 ENT
Configured Successfully
(ENTER or CLEAR)
FAST Code Rejected!
(ENTER or CLEAR)
C–3
Revision 12
MN/CDM570L.IOM
arrow
◄ ►