Comtech EF Data CDM-570 Installation And Operation Manual page 400

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter (Instruction
Type Code and
Response to Query
Qualifier)
SNMP SWC= 255 bytes,
Write Community characters, no
spaces
SNMP STC= 255 bytes,
Trap Community characters, no
spaces
SNMP Trap STA= 15 bytes,
Destination IP Numerical
Address
SNMP Trap STB= 15 bytes,
Destination IP Numerical
Address-2
SNMP Trap Version STV= 1 byte, value of 0 or
1
SNMP Trap Enable SAT= 1 byte, value of 1 or
Authentication 2
Traps
SNMP SSC= 128 bytes,
System Contact characters,
SNMP SSN= 128 bytes,
System Name characters,
Arguments for
Command or
Command or Query.
SNMP write community string. Empty string is not allowed
Example: <1/SWC =public
Command or Query.
SNMP Trap community string. Empty string is not allowed
Example: <1/STC =trapcomm
Command or Query.
Used to set the IP address of the SNMP Trap destination IP Address where traps
will be sent, in the format:
xxx.xxx.xxx.xxx is the IP address
Example: <1/STA=010.006.030.001
Returns >0001/STA=0.0.0.0 When not configured.
Command or Query.
Used to set the IP address of the SNMP Trap destination IP Address where traps
will be sent, in the format:
xxx.xxx.xxx.xxx is the IP address
Example: 010.006.030.001
Returns >0001/STB=0.0.0.0 When not configured.
Command or Query.
1=Snmpv1
2=Snmpv2
Specifies the version of SNMP traps that should be sent.
Command or Query, where:
2=Disabled
1= Enabled
Enables or disables sending SNMP authentication traps.
Command or Query.
SNMP System Contact string
Example: <1/SSC=Joe Net Admin. If not configured it returns empty string.
<1/SSC=
Command or Query.
SNMP System Name string
Example: <1/SSN=Remote1. If not configured it returns empty string.
<1/SSC=
Description of Arguments
E–14
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
SWC = SWC? SWC =x
SWC! (see description of
arguments)
STC = STC? STC =x
STC! (see description of
arguments)
STA = STA? STA =
STA! xx.xxx.xxx.xxx (see
description of
arguments)
STB = STB? STB =
STB! xx.xxx.xxx.xxx (see
description of
arguments)
STV = STV? STV = x
STV! (see description of
arguments)
SAT = SAT? SAT =x
SAT! (see description of
arguments)
SSC = STC? STC =x [1..128]
SSC! (see description of
arguments)
SSN = SSN? SSN =x [1..128]
SSN! (see description of
arguments)
Response to
Query