CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
14.2.9.3
Framing Mode Configuration
Activate the Framing Mode Configuration page from the Configuration page.
The Framing Mode Configuration page contains the following options/fields:
Selection
Framing Mode
EDMAC Mode
EDMAC Slave Address Range
AUPC
Max Power Reached Action
Remote Demod Unlock Action
Target E
of Remote Demod (db)
/N
b
0
Maximum Power Limit
Figure 14-28. Framing Mode Configuration Page
Entry
F
D
V
A
R
U
E
M
14–43
Description
1 – Unframed
2 – EDMAC Framing
3 – EDMAC-2 Framing
1 – Unframed
2 – EDMAC Framing
3 – EDMAC-2 Framing
Enter a value from 10 to 9990 in multiples of ten.
1 – Enable
2 – Disable
1 – No_Action
2 – Generate_TX_Alarm
1 – Nominal_Power
2 – Maximum_Power
Enter a value from 0.0 to 9.9
Enter a value from 0 to 9
Revision 12
MN/CDM570L.IOM