Comtech EF Data CDM-570 Installation And Operation Manual page 433

CDM-570/570L Satellite Modem with Optional IP Module
Appendix F
Step Task
7 CDM-IP 1 Route Table should display the following:
Route001...[test
Next, perform the following steps on CDM-IP 2:
Step Task
8 From Transmitter Configuration Main Menu submenu select Route Table [R] submenu.
9 Enter 1 to configure the first route.
10 Enter a suitable name
11 Set IP Address to 172.17.10.0
12 Set Number of Subnet Bits to 24
13 For Interface to which route is destined to <E-Ethernet S-Satellite Enter : S> select S
14 CDM-IP 2 Route Table should display the following:
Route001...[test
At this point the basic configuration is over and you should be able to:
•
Ping PC 1 from PC 2 and vice versa
•
Ping CDM-IP 2 from PC 1 and vice versa
•
Pass any other data between the 2 PCs
Step Task
15 From PC1:
Ping 172.17.10.1 (CDM-IP 1)
Ping 172.16.10.1 (CDM-IP 2)
Ping 172.16.10.11 (PC 2)
16 From PC2:
Ping 172.16.10.1 (CDM-IP 2)
Ping 172.17.10.1 (CDM-IP 1)
Ping 172.17.10.11 (PC 1)
Route Name Dest IP/SNet Bits
172.16.10.0/24
Route Name Dest IP/SNet Bits
172.17.10.0/24
F–7
MN/CDM570L.IOM
Next Hop MultiCast
POINT-TO-POINT N/A
Next Hop MultiCast
POINT-TO-POINT N/A
Revision 12
State
toSat]
State
toSat]