Comtech EF Data CDM-570 Installation And Operation Manual page 321

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
Selection
Upgrade To
Codecast Multicast
Address
PARAM Image
Statistics
Event Log
Database Operations
Reset
Diagnostics
M&C Interface
Entry Description
U Determines which installed software package that the IP Module or base
modem firmware will overwrite when upgrading with a new software
package. The possible options are:
0 – Oldest : Overwrite the oldest software package based upon date.
1 – Image1: Overwrite the software package loaded into the first slot in
permanent storage.
2 – Image2: Overwrite the software package loaded into the second slot in
permanent storage.
M Multicast address used by VLOAD to upgrade the modem firmware and
param file via streaming multicast. Must match the address specified in
VLOAD.
C Identifies the PARAM file that is loaded on bootup. The options are:
1 – Last saved Parameter file
2 -Factory – uses the internal, hard-coded factory default parameters.
T Displays the Statistics Menu page.
E Displays the Event Log page.
D Displays the Database Operations page.
R Reboots the modem (includes the IP modem and base modem). It has the
same logical effect of power-cycling the unit.
G Displays the Diagnostics page.
F Used for base modem communications debugging
14–51
Revision 12
MN/CDM570L.IOM