CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
14.2.2.3
Feature Configuration Page
Activate the Feature Configuration page from the Administration page.
The Feature Configuration page communicates the current availability for each of the features. If
a feature is marked "Unavailable" then the feature is a FAST feature. FAST features must be
purchased from Comtech EF Data.
The Feature Configuration page contains the following options/fields:
Selection
Ping Reply
Telnet
SNMP
Figure 14-5. Feature Configuration page
Entry
Description
P
Toggle [Enabled] or [Disabled]:
• Enabled tells the IP Module to respond to ping requests directed to the IP
Module Ethernet Interface.
• Disabled tells the IP Module not to respond to ping requests. This is used
as a security feature to prevent unauthorized parities from determining if a
device exists via the ping utility.
E
Toggle [Enabled] or [Disabled]:
• Enabled allows access via Telnet.
• Disabled denies access via Telnet.
N
Toggle [Enabled] or [Disabled]:
• Enabled tells the IP Module to respond to SNMP requests against the
private and public MIB.
• Disabled tells the IP Module not to respond to SNMP requests against the
private and public MIB.
14–8
Revision 12
MN/CDM570L.IOM