Comtech EF Data CDM-570 Installation And Operation Manual page 374

CDM-570/570L Satellite Modem with Optional IP Module
Appendix D
Command
Parameter (Instruction
Type Code and
Qualifier)
Software N/A variable
Information
Initialize Events IEP= None
Pointer
Software Image IMG= 1 byte,
value of 1 or 2
IP Address IPA= 18 bytes,
numerical
Initialize Statistics ISP= None
Pointer
Arguments for
Command or
Response to
Query
Query only.
Complete unit software information.
Example: FRW=
Boot:
FW/10804-1-,1.1.1,03/30/04
Bulk1:
FW/10805AW,1.6.14,12/06/11
FW/10806-1AW,1.6.14,12/06/11
FW/10807-1L,1.7.0,08/26/09
FW/10808-1G,1.1.8,02/14/06
FW/10809-1-,1.1.1,03/30/04
Bulk2:
FW/10805AV,1.6.13,06/25/11
FW/10806-1AV,1.6.13,06/25/11
FW/10807-1L,1.7.0,08/26/09
FW/10808-1G,1.1.8,02/14/06
FW/10809-1-,1.1.1,03/30/04
Command only.
Resets internal pointer to allow RNE? queries to start at the beginning of the stored
events log.
Command or Query.
Current Active software image, where:
1=Bulk Image # 1 currently active
2=Bulk Image # 2 currently active
Example: IMG=1 (Image #1 active)
Command or Query.
Used to set the IP address and network prefix for the 10/100 BaseT Ethernet
management port, in the form xx.xxx.xxx.xxx.yy, where:
xxx.xxx.xxx.xxx is the IP address
yy is the network prefix (8-30)
Example: 010.006.030.001.24
Command only.
Resets internal pointer to allow RNS? queries to start at the beginning of the
statistics log.
Description of Arguments
D–24
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
N/A FRW? FRW=x....x
(see Description of
Arguments)
IEP= N/A N/A
IEP#
IMG= IMG? IMG=x
IMG? (see Description of
IMG* Arguments)
IMG#
IPA= IPA? IPA=
IPA? xx.xxx.xxx.xxx.yy
IPA* (see Description of
IPA# Arguments)
ISP= N/A N/A
ISP#
Response to
Query