Statistics Commands And Queries; Wan Stats - Comtech EF Data CDM-570 Installation And Operation Manual
70/140 mhz satellite modem, l-band satellite modem, reduced chassis depth l-band satellite modem
Hide thumbs
Also See for CDM-570:
- Installation and operation manual (396 pages) ,
- User manual (192 pages) ,
- User manual (162 pages)
Table of Contents
Advertisement
CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
E.5.8
Statistics Commands and Queries
E.5.8.1 WAN Stats
Command
Parameter
(Instruction
Type
Code and
Qualifier)
WAN TX:
N/A
Statistics
WAN RX:
N/A
Statistics
WAN Stats
WSC=
Clear
Arguments for
Command or
Response to
Query
10 bytes,
Query only.
Numerical
Display all WAN Transmit Statistics.
WAN Tx Error – No Route
WAN Tx Error – Packet Start
WAN Tx Error – Packet Front Length
WAN Tx Error – Packet End Length
WAN Tx Packet Invalid Length
WAN Tx Packet Dropped – Sat Overdriven
WAN Tx HDLC Header Byte Count
WAN Tx HDLC Payload Count
WAN Tx HDLC Packet Count
WAN Tx Utilization
Ethernet Traffic Destined to WAN
Actual Satellite Traffic (kbps)
Percentage of WAN Bandwidth Saved
10 bytes,
Query only.
Numerical
Display all WAN Receive Statistics.
WAN Rx Bad Address Count
WAN Rx Pkt Proc CRC Errors
WAN Rx Abort/Octet Errors
WAN Rx Overrun Errors
WAN Rx HDLC CRC Errors
WAN Rx HDLC Payload Byte Count
WAN Rx HDLC Header Byte Count
WAN Rx HDLC Packet Count
WAN Rx Invalid FlowID Errors
WAN Rx SAR Re-Assemble Errors
WAN Rx Header Decomp errors
WAN Rx Memory Alignment Errors
WAN Rx Bad CRC Errors
1Byte Numerical
Command only.
Setting to '1' clears all the WAN Statistics. Clears both Transmit & Receive Stats.
Description of Arguments
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[ 0]chr(13)chr(10)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)
[
0]chr(13)chr(10)
E–27
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
STT!
STT?
Text display of all
WAN/Satellite
Transmit Statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
SRT!
SRT?
Text display of all
WAN/Satellite
Transmit Statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
WSC=
N/A
WSC=
Clear WAN Stats.
Response to
Query
Advertisement
Table of Contents
Troubleshooting
