Comtech EF Data CDM-570 Installation And Operation Manual page 363

CDM-570/570L Satellite Modem with Optional IP Module
Appendix D
Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
Tx Carrier State TXO= 1 byte,
value 0 thru 4
Command or
Response to
Query
Command or Query.
Tx Carrier State, where:
0=OFF due to front panel or remote control command
1=ON
2=RTI (receive/transmit inhibit)
3=OFF due to ext H/W Tx Carrier Off command (not a valid
a command)
4=OFF due to BUC warm up delay (not a valid argument in a command format.)
5=RTI (receive/transmit inhibit), timeout = 1 second
6=RTI (receive/transmit inhibit), timeout = 2 seconds
7=RTI (receive/transmit inhibit), timeout = 4 seconds
8=RTI (receive/transmit inhibit), timeout = 7 seconds
Example: TXO=1 (Tx Carrier ON)
Description of Arguments
argument when used as
D–13
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
TXO= TXO? TXO=x
TXO? (see Description of
TXO* Arguments)
TXO#
Response to
Query