Telnet Interface - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet-based Remote Product Management
Whenever modifying the Modulator or Demodulator parameters by SNMP, it is
important that the variables must be executed in the following:
1.
2.
3.
4.
For detailed OID information, refer to the actual MIB file.
6.5

Telnet Interface

The modem provides a Telnet interface for two primary functions:
•
Equipment M&C via the standard equipment Remote Control protocol
•
Equipment M&C via Comtech Monitor and Control System (CMCS) application
Telnet connection
allowed in both Serial
remote mode and Ethernet
remote mode. The Telnet
interface requires login at
the
Administrator
Read/Write User Access
Levels. An example of the
login process is shown
here:
Once logged into the
Telnet interface as the
Administrator, access the
standard remote control
interface defined in
Appendix D. REMOTE
CONTROL as shown
here:
FEC (Forward Error Correction)
Modulation or Demodulation
Code Rate
Data Rate
is
and
6–8
Revision 12
MN/CDM570L.IOM