Comtech EF Data CDM-570 Installation And Operation Manual page 407

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter (Instruction
Type Code and
Qualifier)
IGMP Server: INM= 2 bytes, Numerical
Number of Missed 1..30
Responses
IGMP Client IRQ= 1 byte, 0 or 1
Recognize
Queries
IGMP IRO= 1 byte, 0 or 1
Client Router Alert
Option for V1
IGMP Client: ICV 1 byte, 0 or 1
Version
IGMP Client: IRI= 2 bytes 0..25
Unsolicited Report
Interval
IGMP View Table N/A String value
Arguments for
Command or
Response to
Query
Command or Query.
Number of missed responses before leaving the IGMP Group. Configured from
1...30
Example: INM=15
Command or Query, where:
0=No
1= Yes
Enable/Disable Recognizing IGMP Queries.
Example: IRQ=0
Command or Query, where:
0=No
1= Yes
Enable/Disable Router Alert option for V1 Reports.
Example: IRO =0
Command or Query, where:
Set the IGMP Version for Unsolicited Reports.
0=V1
1= V2
Recognize IGMP Queries
Example: ICV =0
Command or Query, where:
Set the unsolicited Report Interval [Modem as Client]
Range = 1..25
Example: <1/IRI =14
Query only.
Display the IGMP table with different states. To see the entries, the system should
have the IGMP feature enabled, and should be properly configured to forward
IGMP packets. See WEB interface for proper table format.
Description of Arguments
E–21
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
INM = INM? INM =xxx
INM! (see description of
arguments)
IRQ = IRQ? IRQ =xxx
IRQ! (see description of
arguments)
IRO = IRO? IRO =xxx
IRO! (see description of
arguments)
ICV = ICV? ICV =xxx
ICV! (see description of
arguments)
IRI = IRI? IRI =xxx
IRI! (see description of
arguments)
IGT= IGT? IGT=sssssss
IGT! Table of IP
Addresses and
their state
information.
Response to
Query