Redundancy Queries - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter (Instruction
Type Code and
Qualifier)
Codecast CCA= Multicast IP
Multicast Address Address in
xxx.xxx.xxx.xxx
format
Unit Up Time N/A String value
E.5.6

Redundancy Queries

Command
Parameter (Instruction
Type Code and
Qualifier)
Redundancy State N/A 1 byte, value of 0
or 1
Arguments for
Command or
Response to
Query
Command or Query.
Set the Code cast multicast address, through which the modem can receive the
software updates via vLoad application. Only Multicast address in the range
224.xxx.xxx.xxx To 239.xxx.xxx.xxx are allowed. There are some reserved multicast
addresses which cannot be used.
This cannot be deleted.
Query only.
Displays the unit up time in days, hours, minutes & seconds.
Example: >0001/uut=0 days 0 hours 13 mins 15 secs
Arguments for
Command or
Response to
Query
Query only.
Unit returns the redundancy state of the unit, where
0=Offline
1=Online
Example: RED=1 (which is Online)
Description of Arguments
Description of Arguments
E–24
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
CCA= CCA? CCA=xxx.xxx.xxx.
CCA! xxx
(see description of
arguments)
N/A UUT? UUT=sssssss
String.
(see description of
arguments)
Query
Response to
(Instruction Code
Command
and Qualifier)
N/A RED? RED=x
(see description
of arguments)
Response to
Query
Response to
Query