Cli Menu - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
For connection via Telnet: The user PC must have network connectivity to the Traffic Ethernet
Port of the IP Module. This connectivity can be via a local LAN, a remote LAN, or via a satellite
link from another IP modem. The Ethernet Speed Mode is a configurable parameter of the IP
Module and, as such, its exact setting can vary between specific installations.
The CLI and Telnet User Access Levels are defined as follows:
User Interface
Telnet
CLI (direct to Console port)
The factory defaults for user names/passwords are as follows:
Admin
Read/Write
Read Only
14.2 CLI Menu Pages
Interface Appearance: The remaining sections in this chapter show the CLI pages as they
appear with a user-supplied HyperTerminal terminal emulator. The appearance of this interface
may vary across individual user configurations. Therefore, a complete interface window is
depicted in Figure 14-1 only.
Each chapter section shows the designated menu page and a brief description of its functionality.
A table provides detailed information:
•
Selection: The name of the function or command as it appears on the menu page.
•
Entry: The letter or number assigned as the keystroke/mnemonic for execution of that
function or command. Where the Entry column for a tabulated menu feature is
designated as [RO], this means that the pertinent menu option or field is a read-only
feature.
•
Description: The detailed explanation of the function or command. Where applicable,
command modifiers used to execute a specific action are also specified.
Common Interface Options/Fields: The following menu functions are typical for all primary
and nested screens:
Admin User
Full Access – all
menus
Full Access – no Login
comtech/comtech
opcenter/1234
monitor/1234
14–2
User Login Access Level
Read/Write User
No Access to Admin Menu
Full Access all other menus
Revision 12
MN/CDM570L.IOM
Read Only User
No Access