Activation Procedure; Obtain Unit Serial Number; View Currently Installed Features; Purchase Fast Access Code - Comtech EF Data CDM-710G Installation And Operation Manual

CDM-710G High-Speed Satellite Modem
FAST Activation Procedure
C.2

Activation Procedure

C.2.1

Obtain Unit Serial Number

Obtain the modem serial number as follows:
a) From the front panel
[ENTER].
b) The modem motherboard Serial Number is displayed on the bottom line, to the left:
c) Record serial number:
C.2.2

View currently installed features

To view the currently installed features, proceed as follows:
a) From the
b) Scroll through the modem Options using the ▲▼ arrow keys, and note which options are
'Installed' or 'Not Installed'. Any that are 'Not Installed' may be
purchased as a FAST upgrade:
C.2.3

Purchase FAST Access Code

Contact a Comtech EF Data sales representative to order features. You will be asked to provide
the modem Serial Number. Comtech EF Data Customer Support will verify the order and provide
an invoice, instructions, and a 20-character FAST access (configuration) code.
C.2.4

Enter FAST Access Code

Enter the FAST access code as follows:
a) Press [CLEAR] to return to the
b) Select
c) Select
SELECT:
FAST: Cnfg View
MainBoard S/N: 333333333
menu, select
UTILITY FAST
View Options: 01 (
IF Modulator Installed
FAST: Cnfg View
MainBoard S/N: 333333333
, then press [ENTER]:
Cnfg
FAST Configuration:
Edit Code Demo Mode
then press [ENTER].
Edit Code,
(main) menu, select
UTILITY
________
, then press [ENTER].
VIEW
)
menu:
UTILITY FAST
C–2
Revision 1
MN-CDM710G
then press
FAST,